Workshop Schedule and Registration
In the workshop sessions, participants will receive guidance on assembling
and working with the SRS Robot Kits. Topics in the manual will be explained in
more detail, and additional topics may be discussed.
Please see the Kit Purchasing page for information
on pricing and availability.
Please see the Level 1 page for information
on the Computer Requirements and Recommended Equipment that you
will need to build the robot.
Level 1 Workshop Sessions
There are no level 1 workshops scheduled at this time. Please check back later.
Please see the Level 1 page for detailed
information on the workshop topics.
| Workshop |
Content |
Prerequisites |
| Workshop 1.1 |
Construction of the board and robot. |
Purchase a kit. You may find it useful to bring a
computer to this workshop for preliminary testing of your board. |
| Workshop 1.2 |
Programming parts 1 and 2 from the manual. |
You will need to bring your fully assembled robot and a computer. |
| Workshop 1.3 |
Programming parts 3 and 4 from the manual. |
You will need to bring your fully assembled robot and a computer.
It is expected that participants in this workshop already have software
installed and have successfully built and downloaded programs. |
Level 2 Workshop Sessions
There are no level 2 workshops scheduled at this time. Please check back later.
Please see the Level 2 page
for detailed information on the workshop topics.
| Workshop |
Content |
Prerequisites |
| Workshop 2.1 |
Breadboard experimentation. |
Purchase a Level 2 kit and complete the Assembly
section of the manual (through page 4). Please bring scissors, an
X-acto knife, wire cutters, wire strippers, and a multi-meter to the
workshop (in addition to your robot and computer). |
| Workshop 2.2 |
LCD and Distance Sensors. |
Complete the material for workshop 2.1. |
|
